Victron BPR000065400 Energy BatteryProtect 12/24V 65A
The BatteryProtect disconnects the battery from non essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.
The BatteryProtect is a uni-directional device. It can only deal with current in one direction, so either current to a load, or current from a charger, but not both currents at the same time. In addition to this, current only can only flow from the Battery terminal to the Load terminal. In case of use with a load, the battery connects to the Battery terminal, and in case of use with a charger, the charger connects to the Battery terminal.
Features of the Battery Protect 12/24V 65A
Over voltage protection
To prevent damage to sensitive loads due to over voltage, the load is disconnected whenever the DC voltage exceeds 16V respectively 32V.
No relays but MOSFET switches, and therefore no sparks.
12/24V auto ranging
The BatteryProtect 12/24V 65A automatically detects system voltage one time only (can be re-triggered – see section Programming table)
Programming made easy
The BatteryProtect 12/24V 65A can be set to engage / disengage at several different voltages.
The seven segment display will indicate which setting has been chosen.
Delayed alarm output
The alarm output is activated if the battery voltage drops below the preset disconnect level during more than 12 seconds. Starting the engine will therefore not activate the alarm. The alarm output is a short circuit proof open collector output to the negative (minus) rail, max. current 50 mA. The alarm output is typically used to activate a buzzer, LED or relay.
Delayed load disconnect and delayed reconnect
The load will be disconnected 90 seconds after the alarm has been activated. If the battery voltage increases again to the connect threshold within this time period (after the engine has been started for example), the load will not be disconnected.
The load will be reconnected 30 seconds after the battery voltage has increased to more than the preset reconnect voltage.
A special setting for Li-ion batteries
In this mode the BatteryProtect 12/24V 65A can be controlled by the VE.Bus BMS.
Ultra low current consumption
This is important in case of Li-ion batteries, especially after low voltage shutdown
Customers Also Viewed
Warning: California's Prop 65
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
JB Tools Customer Satisfaction Guarantee: Although JB tools is often not an “authorized” re-seller of all the products it sells and is often not affiliated with the manufacturers or brands of the products it sells, JB Tools stands behind all of the products it sells, because the products JB Tools sells are genuine and authentic. Because JB Tools only sells genuine and authentic products, JB Tools offers its customers a 100% satisfaction guarantee. To ensure 100% customer satisfaction, JB Tools is committed to and strictly complies with its return policy, which offers replacement products to its customers (subject to product availability), or a full refund (less return shipping costs), at the customer’s option, and which you can access by clicking here.
Because JB Tools is an independent re-seller, JB Tools is able to offer the products it sells at the most competitive prices, resulting in substantial cost-savings passed directly to JB Tools’ customers. JB Tools prides itself in being a trusted, internet-based retailer that its customers can rely on for quality products at reasonable prices. JB Tools’ commitment to 100% customer satisfaction is unparalleled, which is why JB Tools offers its customers a best-in-class Warranty Program to all of its customers on all products sold by JB Tools. In the event a JB Tools customer believes that a product purchased from JB Tools has a defective condition and/or malfunctioning issue, JB Tools’ customers can rest assured JB Tools will work with its customers to ensure issues are resolved in accordance with JB Tools’ Warranty Program, which you can access by clicking here.
JB Tools Non-Affiliation Notice and Disclaimer: JB Tools holds itself out as neither the manufacturer, an affiliate of the manufacturer, or an “authorized” distributor of this product. By purchasing this product from JB Tools, purchasers may not be guaranteed any manufacturer-provided services offered by the manufacturer of this product (including any training or technical support that may otherwise be available). By purchasing this product from JB Tools, the manufacturers’ warranty, if any, potentially associated with the product may not be honored by the manufacturer. JB Tools provides this disclaimer to ensure there is no likelihood of confusion unduly influencing your decision to purchase this product, or any other, product from JB Tools, and to ensure there is no confusion as to the existence of any affiliation between JB Tools and the manufacturer of this product. However, JB Tools’ customers can rest assured that JB Tools stands behind its Warranty Program and its Manufacturer Matching Policy,100% of the time. Furthermore, in connection with JB Tools’ satisfaction guarantee, JB Tools matches the price and/or any promotion associated with its products.